RCCSKJ 6106S Xenon Flash Set

Ideal for Navigation Lighting - Xenon is bright enough to see in the daylight!

Warning: Because xenon flash LED brightness higher than the brightness a lot, do not close at eye burst flash, or peril.

• Voltage: 5V

• Auto Strobe (mode 2): automatic blinking, flashing lights directly to the positive and negative voltage on the plus 4-6V, Strobe automatic
  
  blinking, speed and battery voltage level, generally is 1 second flash 1 .

• 2-4 while strobe lights (mode 1): with a trigger plate (# 6104) simultaneously (4-6V power supply) can be achieved 2-4 lights blink, blink
  
  speed and the battery voltage is low, generally 1 second 1 flash (can not be synchronized power on again until the synchronization if
  
  flashing).

• Multi-mode Remote Strobe (mode 1): with a trigger plate (# 6105) simultaneously (6-25V power supply), 1: 2-4 lights blink (stop - slow -
  
  medium - fast), function 2: before and after two sets of lights flashing alternately (stop - slow - medium - fast), 3: 4 lights flashing cycle (stop -
  
  slow - medium - fast), function 4: not connected receivers used by default on a functional work.

• The use of a single independent video:

http://v.youku.com/v_show/id_XMTUyNjExMjgxMg==.html

• 4 lamps used simultaneously video:

http://v.youku.com/v_show/id_XMTUyNjEzNDY5Ng==.htm