 |
 |
 |
|
Package include:
Beware they are offers out there that do not include battery, case or AU charger!!!
This is the complete package.
Taranis Plus Transmitter upgraded version
X8RPCB 16 Channel Smart Port Receiver with PCB Antenna
Battery NiMh 2000mah
Australian Battery Charger
Neck Strap and balancer
New EVA Carry case
| Compatibility | FrSky X series,D series and V8-ll series receives(plus other receivers if an external module is used)
|
| Model | Taranis X9D Plus
|
| Operating Voltage Range | 6 ~ 15V(2S,3S Lipos are acceptable)
|
| Operating Current | 270mA maximum(both RF module and backlit are on)
|
| Number of Channels | Up to 16 channels
|
| Operating Temperature Range | -10~60℃ |
  
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
● Quad Ball Bearing Gimbals
● Receiver Match
● Audio Speech Outputs (values, alarms, settings, etc.)
● Antenna Status Detection and Alters
● Real-time Flight Data Logging
● Receiver Signal Strength Indicator (RSSI) Alerts
● Super Low Latency
● Smart Port Supported
● Vibration Alerts
•Full Telemetry RSSI alarms, poor signal reception warning.
•Transmitter antenna self test
•16 channels
•60 model memories
•64 mixers, 9 flight modes
•16 custom curves with 3-17 points each, 32 logic switches
•Voice or custom sound alerts
•Expand system with USB and SD - card slot provided
•Long range transmission, better than most current 2.4 systems
•Smooth Quad bearing gimbals
•Open source software - allow anyone to add on or enhance the system
•Super low latency, very quick quick response (9ms)
•Large 212 X 64 back-lit LCD screen
•Real-time data logging
•Receiver lock (program locked to aircraft - limited to FrSky receivers running PXX protocol)
•JR Style module bay for additional RF modules and so much more
•Selectable flight mode (1, 2, 3, or 4)
•2 timers, count up or down, throttle %, talking, etc.
•Adjustable Trims - great flexibility
•Training jack
•ARM Cortex M3 32-bit 60MHz
•Integrates with CompanionTX – a FREE computer program that is a transmitter setup buddy. CompanionTX (Windows/Mac/Linux) is used to set-up models with the wizard, save, edit and share your models and settings as well as simulate your transmitter or model setup.
•USB connection for firmware upgrades, sound editing, R/W to the microSD card and integrate with CompanionTX
•Sticks and pots can be calibrated by the end user
•Multiple language support (Radio arrives configured for English language)
•Open source community-driven firmware, so unlike with major manufacturers if you need a special function or have good improvement suggestions just raise your voice, and don't be surprised if it's implemented a couple of days later! Visit http://www.openrcforums.com to meet the developers!
|
|
|
|
|
|
|
